Filter
Top Products
8
The selected delay (23 hours max) set by means of the
relevant button appears on the display for 3 seconds,
then the duration of the previously selected programme
is displayed.
The countdown is updated every hour and when remain
the last 2 hours each 30 min.
If an option which is not compatible with the set wash
programme is selected, the message Err is displayed for
2 seconds.
In the event of operating problems, some alarm codes
can be displayed, for example E20 (see paragraph
“Something not working”).
Alarm codes
Incorrect option selection
Delayed start
When the programme has finished a flashing zero is
displayed.
7 START/PAUSE button
This button has two functions: Start - Pause.
• Start:
After having selected the required programme, press this
button to start the machine; the corresponding pilot light
stops flashing.
If you have selected the delayed start, the machine
begins its countdown. The duration of the programme or
the delay appears on the display.
• Pause
To interrupt a programme which is running, depress the
Start/Pause button: the corresponding pilot light starts
start to flash.
To restart the programme from the point at which it was
interrupted, press the START/PAUSE button again.
Start/
Pause
End of programme