Zanussi ZWF 1640 W Washer User Manual


 
1111
7. Select the spin speed or the
RINSE HOLD option
Press the “Spin” button repeatedly, in order to select the
desired spin speed or the option. The relevant light
will light up.
If you select the option, the machine will stop at the
end of the programme with the water still in the tub.
ZWF 1240 W ZWF 1420 W
ZWF 1640 S - ZWF 1640 W
8. Select the desired options
If your laundry is very dirty, it may be advisable to
select the “Prewash” option.
If you wish the laundry to undergo an extra rinse, select
the “Super Rinse” option.
If your laundry is only slightly soiled, select the “Extra
Quick” option.
Selecting the “Easy Iron” option your laundry is gently
washed and spun to avoid any creasing.
Select the OPTIONS button so as to cause one or few
lights to light up.
Prewash
Extra
Quick
Super
Rinse
Easy
Iron
1600
1200
900
700
Spin
1400
1200
900
700
Spin
1200
900
700
500
Spin
9. Select the DELAY START
To delay starting of the programme, press the DELAY
start button. The figures corresponding to the selected
delay will be displayed for about 3 seconds, after which
the duration of the selected programme will appear on
the display.
During this period it is possible to load other laundry:
depress START/PAUSE button;
load the laundry;
close the door and depress START/PAUSE button
again.
10. Start the programme
Press the START/PAUSE button. The relevant light will
stop flashing. and only the light relevant to the phase
that is in progress will remain lit.
If you have chosen a delayed start, the washing machine
will begin the countdown.
The display will show the duration of the programme or
the selected delay.
11. How to change a programme
during its cycle
You can alter the programme before it starts.
When the programme has started, you can only reset it
by turning the programme selector dial to O and then
you can select the new programme. Start it by
depressing the START/PAUSE button.
12. How to interrupt a
programme during its cycle
Depress the START/PAUSE button to interrupt a
programme which is running, the corresponding light
starts to flash. Depress the same button again to restart
the programme.
Delay
Start