Filter
Top Products
If the side is as shown in fig. 2, you must pick the rear
brackets as in fig. 4.
If, the side is as shown in fig. 3, you must pick the rear
brackets as in fig. 5.
fig. 6 fig. 7
Now you can proceed to fit one of the rear brackets to
the left side of the stands back using the screws sup-
plied (fig. 6 and 7).
fig. 8
Lay gently the washing
machine on the detergent
compartment side (fig. 8).
fig. 9
x5
fig. 10
Loosen the washing machines adjusting feet using the
key supplied with your washing machine, then undo 5
complete turns (fig. 9 and 10).
Important! If the feet are already partly undone, you
must first screw them on again and then undo 5 com-
plete turns.
fig. 11 fig. 12
Slide the stand under the washing machine so that its
front adjusting feet match the stands front brackets (fig.
11) and the rear bracket is positioned against the ma-
chines back (fig. 12).
fig. 13
Screw the rear bracket on-
to the machines back us-
ing one of the supplied
screws (fig. 13).
fig. 14 fig. 15
Return machine and stand to a vertical position, and
screw the other bracket onto the stand and the machines
back using the remaining supplied screws (fig. 14 and
15).
fig. 16 fig. 17
3