Filter
Top Products
10 Display
10.1 10.2
The display shows the following information:
10.1 Child safety lock
This device permits you to leave the appliance unattended during it's functioning.
10.2 • Duration of the selected programme
After selecting a programme, the duration is displayed in hours and minutes (for example
). The duration is calculated automatically on the basis of the maximum recommended
load for each type of fabric. After the programme has started, the time remaining is updated
every minute.
• Selected drying time
After selecting a drying programme the drying time is shown in minutes or hours and minutes.
After the programme has started, the time remaining is updated every minute.
• Delayed start
The Selected delay set by pressing the relevant button appears on the display for a few sec-
onds, then the duration of the selected programme is displayed again. The delay time value
decreases by one unit every hour and then, when 1 hour remains, every minute.
• Alarm codes
In the event of operating problems, some alarm codes can be displayed, for example
(see paragraph «What to do if...»).
• Incorrect option selection
If an option which is not compatible with the set wash programme is selected, the message
Err is displayed at the bottom of the display for a few seconds and the integrated red light of
button 7 start flashing.
• End of programme
When the programme has finished the flashing zero (
) is displayed, the pilot light 9 and the
pilot light of button 7 go out and the door can be opened.
8
www.zanussi.com