1-8 Programme selector dial, spin speed
button, drying level and time, and
available options
Programme Selector Dial
It allows you to switch the appliance on/off and/
or to select a programme.
Spin
By pressing this button you can change the
spin speed of the set programme or select the
available option(s).
Rinse hold
By selecting this function the water of the last
rinse is not emptied out to prevent the fabrics
from creasing. Before opening the door it will
be necessary to empty out the water. To empty
out the water, please read the paragraph «At
the end of the programme».
Eco
Only for cottons and synthetic items lightly or
normally soiled at a temperature of 40°C or
higher. The washing time will be prolonged and
the washing temperature will be reduced. You
can use this option if you want to wash normally
soiled laundry and at the same time save ener-
gy.
Quick Wash
A very short cycle for lightly soiled items or for
laundry which needs only freshening up. We
recommend you to reduce the fabrics loading.
Extra Rinse
This appliance is designed to save energy. If it
necessary to rinse the laundry using an extra
quantity of water (extra rinse), select this option.
Some additional rinses will be performed. This
option is recommended for people who are al-
lergic to detergents, and in areas where the
water is very soft.
Drying Time
If you wish to carry out a timed drying pro-
gramme, press this button until the drying time
you want appears on the display according to
the fabrics (cottons or synthetics) you have to
dry. For Cottons you can select a drying time
from 10 minutes to 250 minutes (4.10). For
Synthetics you can select a drying time from 10
minutes to 130 minutes (2.10). Every time you
press this button the drying time increases by 5
mins.
Easy Iron
By selecting this option the laundry is gently
washed and spun to avoid any creasing. In this
way ironing is easier. Furthermore the machine
will perform some additional rinses in some
programmes. On cotton programmes the maxi-
mum spin speed is reduced automatically.
Start Pause
This button allows you to start or to interrupt
the selected programme.
Delay Start
The programme can be delayed from 30 min -
60 min - 90 min, 2 hours and then by 1 hour up
to a maximum of 20 hours by means of this but-
ton.
Door light
The pilot light 9 illuminates when the pro-
gramme starts and indicates if the door can be
opened:
• light on: the door cannot be opened. The
machine is working or has stopped with wa-
ter left in the tub.
• light off: the door can be opened. The pro-
gramme is finished or the water has been
emptied out.
• light blinking: the door is opening in a few
minutes.
7
www.zanussi.com