WARNING:
before operating this appliance. The following is a guide to using your washer.
QUICK START GUIDE
NOTE: The panel shown above may be different from that of your model.
OPERATING CONTROLS
Power - Press POWER to turn the washer on or off.
Start - Press START to start your washer after a cycle has
have been selected. The lid must be closed for the washer
to start.
Pause/Cancel - Press PAUSE/CANCEL once to
pause or stop the washer at any time. Press PAUSE/CANCEL
once to unlock the lid and add a garment. Press START to
complete the cycle from where it was stopped. Press
PAUSE/CANCEL twice to stop the wash cycle.The washer
will then drain and turn off.
Lid Lock - When the Lid Lock status light glows, the
washer lid is locked.
NOTE:
You
must wait until the
Lid
Lock
Light
turns off
before the
lid
can be opened.
OPTIONS AND MODIFIERS
anytime before Start is pressed.
Press POWER.
Select Wash Cycle.
Select desired OPTIONS and MODIFIERS.
Press START or select DELAY WASH (on some models)
to start wash at a later time.
Changing cycles after pressing Start:
Press PAUSE/CANCEL twice to cancel the cycle.
Select desired Wash Cycle.
Select desired OPTIONS and MODIFIERS.
Press START or select DELAY WASH (on some models)
to start wash at a later time. Washer restarts at the beginning
of the new cycle.
NOTE: To help protect your garments, not all OPTIONS and
MODIFIERS can be selected with all wash cycles.
DETERGENT USE
Using regular detergent will likely result
in wash errors, longer cycle times, and
reduced rinsing performance.
For more information, see “Using the Proper Detergent.”
Allows you to add garments to the washer
after the wash cycle begins. The ADD A
GARMENT indicator light will illuminate,
at which time you can:
Press PAUSE/CANCEL. (Lid Lock light turns off,
then open the lid.) Add garments. (Close washer lid.)
Press START to restart.
To unlock the lid after the Add a garment period,
press PAUSE/CANCEL once. Pressing PAUSE/CANCEL
twice will cancel the wash cycle.
ADD A GARMENT, PAUSING, OR
RESTARTING THE WASHER
STOPPING YOUR WASHER
You can stop the wash cycle and drain the tub by pressing
the Pause/Cancel button twice or the Power button once.
6
To reduce the risk of re, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS
Please refer to specic sections of this manual for more detailed information.
been selected. Be sure all desired Modiers and Options
Use only High Efciency (HE) detergents.
You can change Options and Modiers