Whirlpool W10240441C - SP Washer User Manual


 
10
Spin Speed
This washer automatically selects the spin speed based on the
cycle selected. The preset speeds can be changed. Spin speeds
may vary by cycle.
Faster spin speeds mean shorter dry times.
Slower spin speeds mean less wrinkling.
Wash-Rinse Temp
Select a water temperature based on the type of load you are
washing. Use the warmest wash water safe for fabrics. Follow
garment label instructions.
Warm rinses leave the loads drier and mor
e comfortable to handle
than with cold rinses. However, warm rinses also increase
wrinkling. Cold rinses may help with wrinkling and save energy.
Te mperature Guide
Wash Water Temperature Suggested Colors
Hot Whites and pastels
Warm Bright colors
Cold Colors that bleed or fade
NOTE: In wash water temperatures colder than 60°F (15.6°C),
detergents do not dissolve well. Soils may be difcult to remove.
Care Control Te mperature Management
Care Control Temperature Management electronically senses
and maintains a uniform wash and rinse water temperature.
Care Control regulates incoming hot and cold water and is
automatically turned on when a cycle is selected. (See
“Preset Cycle Settings” in “Cycles.”)
Care Control is available with W
arm/Warm, Warm/Cold, and
Cold/Cold settings. The water temperature in the Hot/Cold and
Tap Cold/Cold settings depends on the water temperature at the
water inlet faucets.
Care Control ensures consistent cleaning.
The Hot and Warm setting on this washer will be cooler than
you are accustomed to. Wash temperatures in this ENERGY
STAR
®
qualied washer are lower than temperatures you may
be used to in conventional washers. Heated water consumes
the largest amount of energy that a washer uses.
Today’s detergents work well at temperatures above 60°F
(15.6°C).
Delay Wash (on some models)
You can use the Delay Wash feature to delay the start of a wash
cycle for up to 10 hours (depending on your model).
1. Load the washer and ll the dispensers.
2. Close the washer lid.
3. Press POWER.
4. Select the desired Cycle, Modiers, and Options.
5. Press DELAY WASH. 1H (one hour) will be displayed in the
time display window. The indicator light for Delay Wash will
glow.
6. For a lo
nger delay time, press DELAY WASH. The Start time
will increase by 1-hour steps.
7. Press START. The countdown in hours to the wash cycle will
show in the time display window and the indicator light will
begin to ash.
NOTE: The Start indicator light will not ash when Delay Wash
is chosen. You must press Start to initiate a countdown for the
cycle to begin.
To change the Delay Wash time:
Press PAUSE/CANCEL.
Press DELAY WASH to select the desired delay time.
Press START to begin the countdown.
To cancel Delay Wash:
Press START again to begin the cycle right away or press
PAUSE/CANCEL twice.
Options
Use these pads to select the desired options for your wash cycle.
Deep Clean
This option provides enhanced cleaning action for tough stains.
The Heavy Duty cycle automatically includes Deep Clean.
Choosing Deep Clean will add approximately 5 minutes to a cycle.
Deep Clean should be started on a dry load only and cannot be
selected after the tub has started lling with water.
Deep Clean may be selected as an option with other cyc
les. See
table for details.
Cycle Deep Clean
(Adds time to the wash cycle)
Whitest Whites Option
Heavy Duty Default
Bulky Items/
Comforters
Not available
Sheets Not available
Normal Option
Casual/Perm Press Option
Colors/Towels Option
Quick Wash Option
Wool Not available
Delicate/Handwash Option
Soak Not available
Rinse & Spin Not available
Drain & Spin Not available
Clean Washer Not available