Filter
Top Products
Operating Your Washer
In This Section
Paae
Paw
Before starting your
washer
T5
.............................
6electing a cycle and time
.............................
.6
Starting or stopping
your washer
....................
.5
Using rinse and spin
.......................................
7
Selecting a load size
. ........................................
5
What happens in each cycle
...........................
6
Selectfng wash-rinse temperatures
.................
.6
Operating your washer properly assures maximum washing efficiency. This section gives
you
important information to help you to select a cycle, time, and temperature for your wash load.
Before starting your washer
Add measured detergent. Then place a sorted
load in the washer before starting. See page 11
for additional ‘Before you wash” information.
Starting your washer:
1. Push in the Cycle Control Knob and turn it
clockwise. Stop when the indicator on the
knob’s outer ring points to the number in the
wash cycle you want. The numbers are
minutes of wash time.
2. Select a load size and water temperatures, if
neccessary.
3. Pull out the Cycle Control Knob.
Stopplng and restatilng your washer:
l To stop the washer at any time, push in the
Cycle Control Knob.
l To restart the washer, close the lid (if neces-
sarv) and pull out the Cvcle Control Knob.
Selecting a load size
Position the Load Size Selector at the setting
that corresponds to the size load you want to
wash.
Select a load size based upon the size of the
load and the fabric you are washing. See page
11 for additional loading information.
To change the load size setting after the
washer has started to fill, move the Selector to
the desired new setting.
5