3. Start the washer
A.
Push in the Control Knob and
turn it to the right. It must be
pushed in and turned only
clockwise
B.
Stop on a number in the cycle you
want. The numbers are minutes
of wash time. The drawing shows
8 minutes of agitation in the
REGULAR HEAVY Cycle.
C.
Start the washer by pulling oui
the Control Knob. The washer
will fill to the level you set with
wash water of the selected
temperature. After filling, the
washer will agitate for the
selected number of minutes
D.
To stop the washer at any time,
push in the Control Knob. To
restart the washer, pull out the
Control Knob.
To set the controls for a rinse and spin
or drain and spin, see page 12.