Filter
Top Products
Starting your washer
Before starting your washer, be sure you have measured and added
detergent, and have put in a properly sorted load.
1.
Select a
2. Select WATER
TEMPERATURES
l
Turn the knob to point at a setting
that describes the size of load you
want to wash.
l
Set the knob on or between EX
SMALL [a few items] and LARGE
(a full load).
See page 5 for details on load
sizes.
LOAD SIZES AND WATER LEVELS
Use less than a full tub of water
when you have less than a full load
to wash.
For best cleaning results, the
load must be able to move freely in
the water. Too big a load or too
little water can tear items.
LARGE (11.3 galsI42.7 L)’
(9.4 gals./356 L)’
(7.5 gals.128.4 L)*
EX SMALL (5.6 gals./21.2 L)’
*Approximate fill with load.
6
For permanent or two faucet
connection:
l
USE WATER TEMP Selector to match
wash and rinse water temperatures
to the type of fabrics being
washed.
For one faucet connection:
l
Set WATER TEMP Selector to
COLD/COLD.
l
See pages 8-11 for details on
changing water temperatures at
the faucet.
Recommended wash temperatures
can be found in your “laundry
Guide” and printed under the
washer lid.