Filter
Top Products
model LC4900XT
For model LC4900XT with one faucet
connection:
l
Set Temperature knob to MANUAL
SELECT area. This allows you to
adjust the water temperatures at the
faucet.
l
See pages 8-10 for details on chang-
ing water temperatures at the faucet.
3. Select cycle and wash time
Start the washer
l
Push in the Cycle Control Knob and
turn it to the right.
l
Stop on the number in the wash cycle
you want. The numbers are minutes of
wash time.
l
Start the washer by pulling out the
Cycle Control Knob. The washer will
fill to the selected water level with the
selected wash water temperature.
After filling, the washer will agitate for
the selected number of minutes.
l
To stop the washer at any time, push
in the Cycle Control Knob. To restart
the washer, pull out the Cycle
Control Knob.
What happens in each cycle
Each cycle has different agitation and
spin speeds designed for different kinds
of fabrics.
Numbers on the dial in each cycle are
the minutes of wash agitation time.
When the Cycle Control Knob is set
to a number and pulled out, the washer
fills before agitation and timing starts,
After agitation starts, the knob turns
clockwise until it points to OFF and the
cycle ends.
NOTE: You may hear the sound of
water spraying during the spin parts of
some cycles. In some cycles, cold water
is sprayed on the spinning load to help
with the rinsing.
Gentle Wash System
For better fabric care in the REGULAR
and PERMANENT PRESS Cycles, the
agitation speed IS reduced during the
last few minutes of wash agitation time.
7