Filter
Top Products
Operating Instructions
The drawings in lhis book may vary slightly from your washer model. They are
designed to show the different features of all the models covered by this book.
NOTE: Your model may not include all the features shown.
Starting your washer
Read “Important Safety Instructions” on page 3 before starting your washer.
Be sure to measure and add deteraent. then place a sorted load in the washer
”
before starting it.
model LC4900XT
model LC4500XT
6
1. Select a water level
For model LC49OOXT
l
Turn the knob to point at a setting that
describes the size of load you want
to wash.
l
Set the knob on or between EX
SMALL (a few small items) and
LARGE (a full load).
NOTE: For best washing results, items
should move freely in the washer. Do
not overload the washer or choose
a water level that is too low for your
wash load.
For best results with permanent
press clothes, use the LARGE
water level.
Reduce wash time when using EX
SMALL water level setting. Loads with
only a few small items need less wash
time for best results.
For model LC4500XT:
The water level is preset. There is no
water level selector.
2. Select water temperature
For model LC4500XT and model
LC4900XT with permanent or two
faucet connection:
l
Match the water temperature to the
type of fabric and soils being washed.
l
The top temperature is the wash
selection and the bottom temperature
is the rinse selection.
NOTE: Use warm wash water with the
PERMANENT PRESS or GENTLE
KNITS Cycles.
For heavily soiled permanent press
or knit clothes, pre-wash or pre-soak
before washing in warm water.
ALWAYS use cold rinse water for
permanent press fabrics.