Filter
Top Products
Portable two faucet
connections
If you have two separate water inlet
hoses and a drain hose, your washer
can be connected to both hot and cold
water faucets.
Connecting the washer:
l
Connect the hot and cold water inlet
hoses to the hot and cold faucets.
l
Secure the drain hose to the sink or
standpipe.
l
Plug the power cord into a 3-prong
grounded outlet.
To disconnect the washer:
l
Turn water faucets off.
l
Unplug power cord and return it to
storage area.
l
Disconnect the drain water supply
hoses. Hang them on the storage
rack.
Permanent installation
This washer can be converted from
portable to permanent. Instructions for
permanent installation come with the
washer.
You will need two fill hoses, one drain
hose and four leveling legs. These can
be purchased from your Whirlpool
Dealer (Kit #285418).