Filter
Top Products
pull start
push stop
A warm wash is pre-set in the KNIT
GENTLE Cycle. Push in and turn the Con
trol Knob so the pointer is on from 4 to 6
minutes. Pull the Control Knob out to
start.
All rinses use cold water.
3.
To use less wash water.
When you have only a few items
to wash, you may want to use less water
to help save energy. Setting the washer
to fill with less water also sets it for 0
shorter og/tot/on time.
l
The washer will fill to its highest level
(about15 3 gallons or 59.9 Mers) when
the Control Knob pornts to a fill area.
l
To use less water, push the Control
Knob in and turn to the rrght (clockwise]
to a fill area in the cycle you want.
l
Pull the Control Knob out; the washer
will start to fill.
l
When there is us much water as you
want in the washer, push the Control
Knob in.
SLOWLY
turn it to the rrght, past
the fill area Pull the Control Knob
out.
i
l
You can have as many as 6 minutes
of agitatron, or as few as 2 minutes with
a low water level in the REGULAR HEAVY
Cycle In the KNIT GENTLE Cycle, you
will have about 2 minutes of agitation.
l
For the rinse, the washer fills to Its
highest level with cold water
4. Load sizes.
For the best cleaning results, the
load should move freely In the water
Watch for rollover. An item [like a sock)
should sink and come up again later.