If You Need
Service or Help,
We suggest You
Follow These Three
Steps:
1.
Before calling for service,
Problems are sometimes caused
by little things you can correct without
tools Check this lrst before you call for
service:
IF YOUR WASHER DOES NOT FILL:
l
Is a fuse blown or crrcurt-breaker
trapped?
l
Are the water supply hoses kinked?
l
Is the Cycle Control Knob set and
pulled out?
IF YOUR WASHER DOES NOT SPIN:
l
Is the Ird closed?
l
Is the power supply cord plugged In?
l
Is a fuse blown or crrcurt-breaker
tripped?
IF WASHER FILLS AND DRAINS WITHOUT
RUNNING:
l
Make sure that the Cycle Control
Knob IS pointing to a number in the
cycle.
MAKE SURE THE DRAIN HOSE IS HIGHER
THAN THE WATER LEVEL IN THE WASHER.
IF IT ISN’T...
l
The washer may seem to be draining
durrng wash and rinse cycles.
l
Water can siphon out. [See Installation
Instructions.)
l
Is the power supply cord plugged in?
l
Are both water faucets open7
10