Filter
Top Products
Starting your washer
Before starting your washer:
B 1. Measure and add detergent
f
2. Place sorted load in washer.
3. Start washer.
Select a Select WATER
1. LOAD SIZE
2.
TEMPERATURES
l
To change the setting on the LOAD
SIZE SELECTOR, turn the knob to RESET.
l
Then turn the knob to point at a
setting that describes the size of the
load you want to wash.
l
Set the knob anywhere on or be-
tween HAND WASHABLE [a few small
items] and EX LARGE (a full load).
See your “Laundry Guide” for details
on load sizes.
l
Select wash and rinse water tem-
peratures by pushing a button.
l
This drawing shows a warm wash
(top temperature) and cold rinse
(bottom temperature) selection.
Recommended wash temperatures
can be found in your”Laundry Guide”
and printed under the washer lid.
LOAD SIZES AND WATER LEVELS
For best cleaning results, the
load must be able to move freely
in the water. Too big a load or too
8
DO NOT
little water can cause wear or
OVERLOAD WASHER.
tearing of load items.
*Approximate
fill with load.
EX-LARGE (20.5 gals.177.6 L)’
MEDIUM (13.9 gals./52.6 L)’
HAND WASHABLE (7.8 gals.129.5 L)’