Filter
Top Products
If you need service or assistance, we suggest
you follow these four steps:
1. Before calling for assistance.. .
Performance problems often re-
sult from little things you can find
and fix yourself without tools of any
kind.
IF YOUR WASHER DOES NOT FILL:
l
Is the power supply cord
plugged in?
l
Are fuses blown or circuit-breaker
tripped?
l
Are the water supply hoses
kinked?
l
Is the Cycle Control Knob set and
pulled out?
IF YOUR WASHER DOES NOT SPIN:
l
Is the lid closed?
l
Is the power supply cord
plugged in?
l
Is a fuse blown or circurt-breaker
tripped?
IF YOUR WASHER STOPS DURING THE
PERMANENT PRESS CYCLE:
0 Remember, the washer will stop for
about 2 minutes after the partial
drain during the cool-down period
in this cycle.
IF WASHER FILLS AND DRAINS
WITHOUT RUNNING:
l
Make sure that the Cycle Control
Knob is pointing to a number in
the cycle.
MAKE SURE THE DRAIN HOSE IS
HIGHER THAN THE WATER LEVEL IN
THE WASHER. IF IT ISN’T...
l
The washer may seem to be
draining during wash and rinse
cycles.
l
Water can siphon out. (See “ln-
stallation Instructions:‘)
l
Are both water faucets open?
14