Filter
Top Products
Using Automatic drying
Use Automatic drying to dry most loads. Your
dryer automatically shuts off when the selected
dryness is reached.
Reg Dry is the preset automatic dryness
selected for Reg/Heavy-High, Perm Press-
Med, and Delicate+Low cycles. You can
change the Automatic setting (or select a
Timed setting) to match your load.
1. Press ON/SELECT
until the light glows by the Cycle/Temp
desired (Reg/Heavy, Perm Press, or
Delicates).
PRESS
YOU SEE
2. Press SELECT
PRESS
YOU SEE
until the light glows below “Automatic” and
Automatic
by the desired Automatic dryness. (Change
Options, if desired. See pages 13-l 4.)
0
Select
.‘;;.
VWf Bly
More Dty
q
Reg Dry
WDfY
Least Dry
3. Press START.
PRESS
0
Start
Use Automatic drying to dry most
loads
If you want to dry a load using a Timed setting,
see “Using Timed drying” on page 9.
l If the load is drier than you like, select LESS
DRY or LEAST DRY the next time you dry a
similar load.
l If the load is not as dry as you like, complete
drying using a Timed setting. Select MORE
DRY or VERY DRY the next time you dry a
similar load.
NOTE: When you press Select, the Automatic
dryness settings are selected first (starting with
Reg Dry). Continue to press Select for a Timed
setting (see page 9).
8
Automatic
.I#
-a-
Very Dry
More Dry
cl
WI Dry
Less
Dry
Least
Dry