Filter
Top Products
Selecting cycles/temps
Press ON/SELECT until the light glows by the
desired cycle. (The ‘preset” selections are:
Perm Press-Med, Automatic Reg Dry with
Cycle Signal and FINISH GUARD@ Options
ON.)
YOU SEE
Preset selections
To select a different cycle/
temp
Press ON/SELECT until the light glows by the
desired Cycle/Temp. Your dryer makes
selections for each Cycle/Temp. You can
change these selections if desired. See the
charts on pages
11
and 12 for the selection
you want to change.
PRESS
YOU SEE
Fire Hazard
Do not dry plastic or rubber items with
heat. Use the Fluff Air cycle, or line dry.
Failure to do so could result in fire or
damaged items.
NOTES:
l The last few minutes of all cycles are without
heat to make the load easier to handle.
l To help reduce wrinkling, remove the load from
the dryer as soon as tumbling stops. This is
important for permanent press, knits and
synthetic fabrics.
10