Filter
Top Products
Changing the drum light
ElectrIcal Shock and Fire Hazard
l Before removing light bulb, either
unplug the dryer or disconnect the
dryer at the main power supply.
l The bulb cover must be in place during
dryer operation to prevent overheating
and possible damage to fabrics.
Operating the dryer with the bulb cover
removed could cause the dryer to fail or
create a fire hazard.
1. Unplug the dryer or disconnect the elec-
tricity leading to the dryer at the main power
supply.
2. Open the dryer door and remove the light
bulb cover from back wall of the dryer. Turn
the cover clockwise to remove.
3. Remove the light bulb by turning it counter-
clockwise.
4. Replace the bulb with a 40-watt appliance
bulb only.
5. Replace the light bulb cover and lock in
place by turning counterclockwise.
6. Reconnect power supply.
Replace
\\
bulb cover
17