Filter
Top Products
Dew Pt Setup
This screen allows the operator to set the dew point alarm value.
The
HIGH LIMIT ALARM VALUE is an audible/visual alarm which will sound when
the process air dew point rises to this value. Values can be set for degrees Fahrenheit
between – 40 through +15 degrees and degrees Celsius between -40 through -10
degrees.
Setting Values
By pressing and holding the numbers in the HIGH DEW PT ALARM, the ALARM
STARTUP DELAY
or the ALARM BED SW DELAY buttons, the following screen will
be displayed:
Enter the values you would like to set in the screen by pressing the number keys. Press ENT
(Enter) when you are finished to set the new values or CLR (Clear) to erase the current
values and reenter new ones. To set the values in the next field, press ENT (Enter) to close
the screen shown above. Then select the next number field to enter new values.
Once this feature has been set, the operator can return back to the
DRYER MENU or MAIN
MENU
by touching the appropriate button on the screen.
Auto Start
This screen allows the operator to set the time and day that the dryer will start
automatically. Reference page 32, Make sure the clock is set to current date ant time.
Pressing
NEXT DAY allows the operator to scroll forward through the days of the week to
select the day they desire the dryer to start. Pressing
PREV DAY allows the operator to
scroll backward through the days of the week to select the day they desire the dryer to start.
Portable Drying/Conveying Systems Chapter 4: Operation 29 of 63