Filter
Top Products
Installing the washer-dryer 11
Completing the installation
• Check the electrical requirements. Be sure
that you have the correct electrical supply
and the recommended grounding method.
• Check that the shipping brackets have been
removed.
• Check that the water faucets are ON.
• Check for leaks around faucets and inlet
hoses.
• Plug washer into a grounded 3-prong outlet.
• Slide the washer-dryer to it’s final location
and confirm that it’s level.
• When installing this appliance in an RV or
marine vessel, you should block in the unit
to prevent it from shifting or tipping. A
SecureFit Bracket Kit is available from
Splendide to keep the unit from shifting
front-to-back or side-to-side.
• Test and clean the washer. Run a test load
with no laundry.
Testing and cleaning the washer,
• Press the ON-OFF button to turn the washer
ON
• Pour 1 to 2 TBSP of powder detergent into
the detergent dispenser compartment ‘2’
• Select wash program ‘2’.
• Make sure the DRY TIME knob is in the ‘OFF’
position.
• Then press START. Allow the washer to
complete the wash cycle.