Filter
Top Products
10 Installing the washer-dryer
Leveling the washer-dryer
• To access the front
leveling legs, tilt the
machine backwards,
leaning it against a
wall or other stable
structure.
• Adjust the legs up
or down (Fig. 9) to
ensure the washer is
resting solid and
does not rock side-to-side or front-to-back
when the machine is upright.
• Check that the angle of inclination, measured
according to the work top, does not exceed 2°.
Fig 9
IMPORTANT:The machine must rest solid
on a sturdy floor for optimum performance
and minimum vibration.
If a cabinet door is installed, a min. opening
of 8 sq. in. should be provided for make up
air. Louvered doors with equivalent air
openings are acceptable. Allow clearances
behind door(s) to avoid rubbing between
back of cabinet door(s) and front control
panel. Additional clearances for all, door
and floor molding may be required.