Filter
Top Products
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Operation
39971
22
Timer
Although the washer cycles are automatic, the timer
may be reset to lengthen, shorten or repeat a portion of
a cycle.
To set or reset the timer, push timer knob in to stop the
washer. Hold timer knob in firmly while turning it
clockwise to the setting desired. Pull timer knob out to
start the washer.
Soaking
Set the timer knob in the center of the word “RINSE”
(this prevents the washer from spinning without first
filling with water). Place the soaking product and
clothes load in the washtub. Pull timer knob to start
washer fill. After fill is completed and agitation has
started, push the timer knob in. This will stop the
washer. When the clothes have soaked the desired
length of time, TURN THE TIMER KNOB TO THE
END OF THE RINSE SETTING, then pull the timer
knob out to start the spin.
Failure to turn the timer knob to the spin
cycle and completely draining the washtub
after soaking will result in the washer
overflowing and causing property damage.
W256
CAUTION