Filter
Top Products
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Installation
39971
10
Before You Start
Tools
For most installations, the basic tools you will need
are:
Figure 1
Installing the Washer
NOTE: If washer is delivered on a cold day (below
freezing), or is stored in an unheated room or area
during the cold months, do not attempt to operate
it until the washer has had a chance to warm up.
NOTE: Install dryer before washer. This allows for
attaching exhaust duct.
Step 1: Remove the Shipping Brace and
Shipping Plug
Remove the shipping brace from under the lid. The
plastic shipping plug will be released from the base of
the washer when removing the cardboard base from
the washer.
NOTE: Do not tilt washer to front or sides when
moving.
Save brace and plug and reinstall whenever washer is
moved.
Figure 2
D074I
1 Wrench
2 Screwdriver
3 Pliers
4 Level
D074I
1
2
3
4
TLW521N
1 Shipping Brace
2 Shipping Plug
1
2