Filter
Top Products
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Operation
21
39971
To Wash Clothes
IMPORTANT: Before using your new washer,
make sure the washer cord is plugged into an
electrical outlet that has the proper grounding and
polarity. Make sure the washer hoses are connected
to the hot and cold water faucets, and that the
faucets are turned on. Be sure the drain hose is not
kinked and is inserted into a drain. Refer to the
INSTALLATION section for details of proper
washer installation.
IMPORTANT: Remove all sharp objects from
laundry to avoid tears and rips to items during
normal machine operation.
1. Sort items into separate loads. Pretreat stains and
heavily soiled areas.
Figure 24
2. Measure and add detergent to the washtub.
Figure 25
3. Add clothes loosely into the washtub.
Figure 26
4. Close the lid. The washer will not agitate or spin
with the lid open.
Figure 27
5. Set WASH/RINSE temperatures.
NOTE: The washer will provide a cold rinse in all
TEMPERATURE settings. Cold rinses will save
you money and energy and will help reduce
wrinkling in permanent press and synthetics.
Do not use a warm rinse with permanent press or other
synthetic fabrics. A warm rinse can cause wrinkling in
some garments.
When using the HANDWASH/DELICATE cycle, a
WARM rinse is not available. If the WASH/RINSE
selection is set on WARM/WARM, the washer will
still give a COLD rinse. This is to assure proper care
of delicate items.
NOTE: The Energy Saver settings, marked with a
dot (•) or an asterisk (*), show which temperature
settings will use the least energy.
6. Set LOAD SIZE (WATER LEVEL) control. Use
RESET if agitation has started and more water is
needed.
IMPORTANT: Holding the LOAD SIZE (WATER
LEVEL) control in the RESET position can cause
flooding of the washer.
7. Select the cycle according to the type of fabric
being washed. Push the timer knob in and turn
clockwise to the desired cycle and wash time.
8. Pull the timer knob out to start the water fill.
Agitation will begin when the water reaches the
level you selected.
The washer will stop (pause) shortly before the
wash and rinse spins. Do not turn the timer
through these pauses. They are part of the cycle.
D305I
W395I
W281I
W281I
W318I