Filter
Top Products
30
M412616
75 (34 kg) Pound Steam Tumblers
Cabinet Finish: Electrostatically applied thermosetting polyester
Cylinder: 37" x 36" (94 x 91.4 cm) perforated galvanized steel with four baffles;
75 pounds (34.1 kg) dry weight (cotton load)
Motor: High Pressure Steam — 3/4 H.P.
(Non-reversing models) Low Pressure Steam — 3/4 H.P.
Both motors are lifetime lubricated, internal overload protected.
(See below for reversing models.)
Boiler High Pressure Steam (6 Coil) — 4.60 BPH
Horsepower: (154,100 BTU/hr., 72.1 kg/hr., 38,833 kCal/hr.)
Low Pressure Steam (4 Coil) — 4.00 BHP
(134,000 BTU/hr., 62.7 kg/hr., 33,768 kCal/hr.)
Electrical Requirements: Low Pressure — 230 Volt, 50 Hertz, 1 Phase, 8.5 Amp
(See nameplate for voltage
of your tumbler) High Pressure — 230 Volt, 50 Hertz, 1 Phase, 9.0 Amp
Air Flow: Low Pressure — 950 C.F.M. at 0.5" W.C. (449 liters/sec at 1.25 mBar)
High Pressure — 900 C.F.M. at 0.5" W.C. (425 liters/sec at 1.25 mBar)
Net Weight: 615 Pounds (280 kg) (approx.)
REVERSING MOTOR SIZES
GAS ELECTRIC
STEAM
HIGH PRESSURE LOW PRESSURE
75 LB.
FAN
1/3 H.P. 1/3 H.P. 1/3 H.P. 1/2 H.P.
CYLINDER
1/3 H.P. 1/3 H.P. 1/3 H.P. 1/3 H.P.