Filter
Top Products
Installation
17
510988
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
1. Remove access cover from rear of dryer.
2. Use a strain relief and insert end of power cord
through power supply hole.
3. Use the three screws from the envelope located in
the cylinder to attach the power cord wires to the
terminal block.
4. Tighten all screws and reinstall access cover
removed in step 1.
Figure 9
D286I
1 “L1” Terminal
2 Neutral Terminal
3 “L2” Terminal
1
3
2