Speed Queen H3 Washer User Manual


 
Installation
801561
6
© Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT
Before You Start
Tools
For most installations, the basic tools you will need
are:
Figure 1
Electrical
Refer to serial plate for specific electrical
requirements. For more detailed information refer to
section on Electrical Requirements.
Water
Washer needs two standard 19.1 mm (3/4 in.) water
supply faucets with a pressure between 138 and
827 kPa (20 to 120 pounds per square inch). For more
detailed information refer to section on Water Supply
Requirements.
Accessories Bag
An accessories bag has been shipped inside your
washer. It includes:
Two inlet hoses with washers. Refer to step 2 of
Installation.
Four rubber feet. Refer to step 4 of Installation.
Beaded tie-down strap. Refer to step 3 of
Installation.
Installation instructions.
Operating instructions.
Warranty bond.
Bag for storing shipping materials.
D820I
1 Wrench
2 Screwdriver
3 Pliers
4 Socket Wrench
5 Level
1
2
3
4
5