Filter
Top Products
Installation
9
801561
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Figure 6
Sink Installation
For this type of installation, use the beaded tie-down
strap (supplied in accessories bag) or use a large wire
tie (available from your local hardware store), and
secure the drain hose to the cabinet top hinge (refer to
Figure 7). This will prevent the drain hose from
dislodging during use.
Figure 7
In-the-Wall Installation
For installations of this type, the drain hose MUST be
secured to one of the inlet hoses using the beaded tie-
down strap from accessories bag.
NOTE: End of drain hose must not be below 61 cm
(24 in.).
Figure 8
FLW2010N
1 61 to 91.44 cm (24 to 36 in.) Recommended
Height
2 Standpipe – 5.08 cm (2 in.) or 4 cm
(1-1/2 in.)
3 Beaded Tie-Down Strap
FLW2011N
1 Drain Hose
2 Tie-Down Strap (Wire tie or tape if
necessary)
1
2
3
FLW2011N
1
2
H023I
1 Drain Hose
2 Tie-Down Strap (Tape if necessary)
3 Inlet Hoses
2
3
1