EN
16
I
Select spin speed and
drying time for delicates
button
Press the button repeatedly to select the required spin
speed. The following spin speeds are available:
• 0000: spin disabled and stop with tub full. The
machine does not perform the final spin and ends the
washing programme with water in the tub. To drain
the water, see the explanations shown in paragraph
5.13
• from 600 rpm to the maximum speed indicated for
the model: for cotton and coloured programmes,
speed increases by 100 rpm starting from 600 rpm
up to the maximum speed indicated for the model
• from 600 to 900 rpm: for synthetics, delicates and
woollens programmes, speed increases by 100 rpm
starting from 600 rpm up to 900 rpm.
Also, select the delicates drying programme (see G).
L
Drying programme button
and drying time
Press the button repeatedly to select the drying programme.
As regards the drying time, it ranges from 2:00 hours down to
0:00 hours.
M
N
Options buttons
The options that may be available on the washer dryer are
shown below.
Quick wash Button
This button reduces the overall duration of the washing cycle. This
option is used to wash small loads or less dirty washing in less time.
The bleach stage is skipped when the Quick Wash button is
pressed (for models with bleach function).
(M)
Select delayed start
button
– (only for
models with this option)
Press the button repeatedly to select the required time from
that moment to start the washing/drying programme selected.
The value set by the machine is 0 hours 0 minutes and, using
the button, this value can be increased by 60 mins up to 12
hours and by 120 mins for the next 12 hours, up to 24 hours.
Increase water button
This washer dryer is programmed to use a certain quantity of water
and consume a certain amount of power considered to be sufficient
for a normal washing cycle.
Only press this button for specific requirements, e.g.: for very
delicate fabrics (curtains or wool).
The water level for washing and rinsing rises and power
consumption for heating increases.
Easy-iron button
This option reduces creasing on garments at the end of the
programme. The machine performs a more delicate spin cycle and
moves the garments at the end of the programme. Spin speed for
all programmes is 600 rpm.