Filter
Top Products
• Water pressure of 1-10 bars from your tap will enable your machine
to work more efficiently.(1 bar pressure means water flow of more
than 8 liters in 1 minute from a fully opened tap).
• After connections are completed, check for the non-leakage of the
connection joints by turning on your tap completely.
• Be sure that water inlet hoses are not folded, broken or crushed.
• Mount the water inlet hoses to a 3”/4, geared water tap.
Cold water inlet (White filter valve)
Hot water inlet (Red filter valve)
WATER DRAIN CONNECTION
• Be sure that water inlet hoses are not folded, twisted, crushed or
elongated by stretching.
• Water drain hose should be mounted at a height of minimum 60 cm,
maximum 100 cm from the ground.
• The end of the water drain hose may directly be fitted to the dirty
water outlet hole or a special apparatus mounted on the outlet
bracket of the wash-stand.
• Never attempt to extend the water drain hose by adding extra parts.
5