Filter
Top Products
FAILURE CODE
FAILURE
INDICATOR
PROBABLE
FAILURE
THE PROCESS
TO BE DONE
E02
The 1 avd 3
number light
blinks.
The water
level in your
machine is
below heater.
The pressure
of your water
supply may
be low or
locking.
Turn on the tap
to the end.Water
may be cut,
check it.If the
problem is still
continuing,your
machine will
automatically
stop after a
while.Unplug
your machine,
turn off the tap
and apply to the
nearest
authorized
service.
E03
The 1 and 4
number light
blinks .
The pump
has failed or
the pump filter
is obstructed
or drain pump
is in open
circuit.
Clean the pump
filter.If the
problem
persists,apply to
the nearest
authorized
service.(*)
E04
The 2 and 3
number light
blinks.
There is an
excessive
amount of
water in your
machine.
Your machine
will automatically
drain the water.
After your
machine has
completed the
draining
process,shut
down your
machine and
unplug. Close
the tap and
apply to the
nearest
authorized
service.
(*) See the section regarding the maintenance and cleaning of your machine.
29