Filter
Top Products
FUNCTION BUTTONS
Rinse hold
This function is recommended to be used when the clothes
cannot be taken immediately after the end of the program.
This will prevent occurrence of wrinkles.When this button is
pressed, the last rinsing water is not drained. For the
program to continue from the same point, repress the same
button.
If you do not want your sensitive clothes to be spinned or you
want them to be spinned sensitively, turn the program knob
to O (off) position. Bring the program knob on one of
the draining or spinning programs you desire and press
the start/pause button. If the program you have
selected is a drain program, your machine will
draining the water inside.If you have selected a
spinning program, your machine will perform a spinning
operation and then end the program.
Extra rinse
You can have one more rinsing done in addition to the rinses
which your machine has made in all washing programs by
using this function.
Easy ironing
By using this function, you can ensure your clothes to come
out less wrinkled after the washing.
Economy wash
This function serves for saving energy via decreasing the
temperature value and increasing the wash time of the
selected wash programme by a certain level.
Your machine has also an automatical load detection
system.If you load your machine with half load or less than
half load, your machine can detect this lower load and
change the program flow.If it happens, your “rapid wash”
option lamp will be on to show you that lower load is
detected.If you don’t want your program flow to be
changed,then you can press “rapid wash” option button again
and cancel detection.This time machine will work with normal
program flow and it will not be possible to activate “rapid
wash” for this cycle again.
9