Filter
Top Products
Timer
The timer function enables you to set your machine to start its
wash operation with delay. Depending on the delay time you wish
the programme to start at press the function button until the
desired delay timer lamp (1h/3h/5h/7h) lights up on the control
panel. The lamp above the function button will flash. Start the
programme by pressing the start/hold button. If the functıon
button is pressed once more,this option is cancelled and you go
back to the selection mode. After pressing the start/pause button,
the countdown of the time delay begins.When the programme
starts, the start delay indicator light goes off and is replaced by
the programme sequence indication.
WARNING!
If you have forgotten to use an additional function and the machine has
started the wash operation press the button of the additional function
you wish to select; if the indicator lamp above it keeps lighting the
additional function you selected will become active. If the lamp stays lit
for a certain while and then goes out the additional function you
selected will not become active.
NOTE: Our products contain electronic cards and touchscreen buttons.
Lightly pressing on the buttons will suffice to activate the functions.
11