Filter
Top Products
19 20
T: 0800 0124 382 T: 0800 0124 382
SETTING UP
CONTROL PANEL OVERVIEW USING THE SMART TOUCH BUTTONS
A series of 6 smart touch buttons can be found below the information screen. To make a
selection, press the button below the desired selection choice on the information screen. For
example, if the instructions in this user manual say ‘Press the
button’ press the button
directly below the
symbol.
Your Washer Dryer has a range of adjustable features that can be altered to suit your
preferences. To make the initial settings please ensure that:
1
The transit bolts have been removed.
2
Your Washer Dryer has been correctly connected to your water supply and your water
drainage system.
3
Your Washer Dryer has been connected to an appropriate mains power supply and is
switched on at the socket.
4
The programme dial is turned on i.e. is not in the ‘STOP’ position.
Current Time Setting
We recommend that you set the correct time during the initial set-up of your Washer Dryer. After
turning your Washer Dryer on for the first time it will check to see if you would like to set the
current time ‘set day time’ will be displayed on the information screen (fig 11).
To set the current time, press the
button. Alternatively, press the button to exit
without setting the time.
1
Programme Dial; Allows you to select a washing and drying programme.
2
Information Screen; Displays details of the selected programme and information on the
status of your Washer Dryer.
3
Smart Touch Function Buttons: Allow you to select or adjust a particular function.
4
Start/Pause Button: Start or Pause the selected programme.
5
Memory Button: Allows you to store preferred settings.
Figure 10
1
2 4
5
3
SETTING UP YOUR WASHER DRYER