Filter
Top Products
OPEBATBON
HOW TO USE YOUR WASHER
IF YOU HAVE ANY PROBLEMS OPERATING YOUR
PRESSURE WASHER, PLEASE CALL THE PRESSURE
WASHER HELPLINE AT 1-800-222-3136.
STOPPING YOUR PRESSURE WASHER
,,F
FIG. 6
o If the pressure washer is running, press the ON/OFF
switch (Fig 6)
o Simply shutting OFF washer will not release pres-
sure in the system. Pullthe trigger on the spray wand
assembly to relieve the pressure in the hose_
NOTE: A small amount of water will squirt out when you
release the pressure
WAND EXTENSIONS
Your high pressure washer comes equipped with a choice
of three wand extensions -- one with an adjustable nozzle
(Fig. 7), one with a utility brush (Fig. 8) and turbo nozzle
(Not shown)_ Remove the adjustable nozzle extension if
you wish to use the utilitybrush. Attach the Brush Adaptor
tothe utilitybrush and then insertthe threaded end into the
spray gun and hand tighten.
ADJUSTABLE
NOZZLE
UTILITY
ADAPTOR
FIG. 7 FIG. 8
HOW TO USE ADJUSTABLE NOZZLE
A WARNING: NEVER ADJUST SPRAY PATTERN
WHEN SPRAYING. NEVER PUT HANDS IN FRONT
OF SPRAY NOZZLE TO ADJUST SPRAY PAT-
TERN.
With the adjustable nozzle you can adjust the spray pattern
to be either high pressure or low pressure. You can also
adjust the spray so it is concentrated in a stream pattern or
expanded into a fan pattern. Use this nozzle to apply
detergent
= Push the nozzle attachment forward when you wish to
adjust the spray to low pressure mode (Fig. 9) Pullthe
nozzle backward to achieve high pressure.
,, Twisting the nozzle adjusts the spray pattern from a
narrow stream to an expanded stream.
NOZZLE IN HIGH
PRESSURE MODE
PUSH NOZZLE FORWARD FOR TWIST NOZZLE TO
LOW PRESSURE MODE AND EXPAND SPRAY STREAM
DETERGENT APPLICATION
TWIST NOZZLE TO NARROW
SPRAY STREAM
FIG. 9