4
maximum 200 watts can exceed the inverters surge capa-
bility and cause an automatic overload shutdown.
Make sure the device you are using is compatible with a
modiedsinewaveinverter.
OPERATING INSTRUCTIONS
How to use the 12 Volt Accessory Plug:
1. Placeinverteronatsurface.MakesuretheACoutlet,
theON/OFFswitchandUSBportareeasilyaccessible.
The 12 Volt accessory cable and plug should face toward
the 12 Volt accessory outlet.
IMPORTANT:Keepinverterwell-ventilatedand away
from liquids and moisture at all times.
2. MakesuretheON(I)andOFF(0)rockerswitchisin
theOFF(0)position.
3. If necessary, remove the cigarette lighter from its outlet.
Pushthe 12 Volt power plugrmly into the12 Volt
accessory outlet. The LED indicator light should glow
GREENverifyingtheinverterisreceivingpower.
4. Make sure the device to be operated is OFF. Plug the
power cord of the device into the inverter’s AC outlet.
5. TurntheinverterrockerswitchtotheON(I)position.
TurnthedeviceON.
6. To disconnect, reverse the above steps.