Schumacher PID-200 Washer User Manual


  Open as PDF
of 12
 
3
• Only connect the Power Inverter to a 12-Volt battery
accessory outlet. Make sure the AC plug connection is
tight.
• DonotmodifytheACreceptacleinanyway.
• Useonly25-ampfuses.
• Thisdevicedoesnotinclude aninternalGroundFault
Circuit Interrupter (GFCI). For GFCI protection, use a
ColemanCable02822GFCIoutlet.
WARNING: Handling the cord on this product or cords as-
sociated with accessories sold with this product, may expose
you to lead, a chemical known to the State of California to
cause cancer and birth defects or other reproductive harm.
Wash hands after handling.
BEFORE USING PID-200 POWER INVERTER
It is important to know the continuous wattage of the
device you plan to use with the inverter. The PID-200
must be used with devices drawing 200 watts or less. If
the wattage is not marked on the device, an estimate can
bemadebymultiplyingtheACinputcurrent(Amps)bythe
ACvoltage(110V).
Devices like TVs, fans or electric motors require additional
power to start (commonly known as the “starting or peak
power”). The PID-200 can supply a momentary surge
in wattage; however even devices rated less than the
 previous next