Schumacher PID-200 Washer User Manual


  Open as PDF
of 12
 
10
PROBLEM: Keeps Blowing Fuses
Reason/Solution
1. Fuse may be rated too low.
2. Check auxiliary socket for debris or short.
3. May be bad unit.
Try unit in another socket.
SPECIFICATIONS
Maximum Continuous Power ............................. 200 Watts
SurgeCapacity(OutputWattage) ...................... 400 Watts
NoLoadCurrentDraw ...................................... <.36 Amps
Wave Form ......................................... ModiedSineWave
Input Voltage Range.................................... 11 – 15.5V DC
Low Battery Alarm .................................. 10.7V – 11.3V DC
Output Voltage ......................................... 110V – 125V AC
Low Battery Shutdown ...........................10.2V – 10.8V DC
High Battery Shutdown ..........................15.0V – 16.0V DC
OptimumEfciency ........................................... >90% max
AC Outlets ......................................One, 110V AC 3-Prong
USB Port ......................................................................One
36" Cable with 12 Volt Accessory Plug ........................One
Fuse ............................................................... One, 25 Amp
 previous next