Russell Hobbs RH1250TW Washer User Manual


 
- To activate the time delay of the programme you have selected, you should press
the “Start/Pause” button and the time delay will start to count down.
The time Intervals of the delay timer is 30 minutes for the first 2 hours, thereafter it is
1 hour up to 23 hours.
If you have missed the time delay you wanted, you can go back to the time desired
by continuously pressing the delay timer button.
If you want to cancel the delay timer, you need to press and hold the delay timer
button for 2 4 seconds.
To run the delay timer function, your machine needs to be operated by pressing on
Start/Pause button. As soon as you start your machine, the countdown process will
start on the electronic display based on the delay period you have selected.
Anti-Allergy Function
In the programmes where this function is active,
your machine will perform an extra rinsing operation
on your laundry prior to the last rinsing operation.
Note: The anti-Allergy function is selected automatically only in Baby wear
programme.
Start/Pause button
By pressing the Start/Pause button, you may start
the programme you have selected or suspend a
running programme. If you pause a cycle, the
electronic display will blink.
When you start your machine, the following symbols for the programmes you have
selected will be available on the electronic display.
- Temperature of washing water
- Spin speed
- Symbols of auxiliary functions (if you have selected)
- Programme ending time or programme delay time based on your selection
- Open or locked door symbol
Note: Symbol for open door flashing on electronic display will go off and symbol for
locked door will flash approximately 1 minute after you start your machine by
pressing the Start/pause button.
For Customer Services, Spare Parts & Manufacturer's Warranty Information please call 01204 664 084
-21-
Open
Closed