Russell Hobbs RH1250TW Washer User Manual


 
Using your machine
Before Use
Plug your machine in.
Turn on the tap connected to yoour machine.
Open the machine door.
Place your laundry in your machine.
Push the door of your machine until hearing the locking sound to
close it.
Select the program you require.
Put detergent and softener in the detergent drawer.
First Wash
Before using the machine for laundry, ensure you run the machine on a cycle of
95°C, with detergent and without laundry.
Selecting a Programme
Select the appropriate programme for your laundry from the programme table below.
Additional Functions
Before starting the programme, you can select an additional function if you so wish.
Press on the button of the additional function you wish to select.
If the additional function symbol on the electronic display flashes continuously, the
function you have selected will be activated.
If additional function symbol on electronic display blinks, the function you have
selected will not be activated.
If an additional function fails to activaite, this is because not all additional
functions are available with all programmes.
Half Load Detection
Your machine features a half-load detection system. If you only put laundry into the
machine that is approximately half or less than half of the maximum laundry capacity
stated for your machine , your machine will run so as to save washing time, water
consumption and energy in some programmes (Cotton 95°, Cotton 60°, Cotton 40°).
When half-load function is active, the machine can complete the programme you
have set in a shorter time.
For Customer Services, Spare Parts & Manufacturer's Warranty Information please call 01204 664 084
-15-