Filter
Top Products
Unsatisfactory washing result.
The dirtiness of your laundry
does not match the programme
you have chosen.
Select the programme
appropriate for correct dirtiness
of your laundry. (see
programme table)
Amount of detergent used
insufficient.
Adjust the amount of detergent
based on the dirt level of your
laundry.
Laundry in excess of maximum
capacity put in your machine.
Load your machine with
laundry, amount of which
should not exceed maximum
laundry capacity
Error Messages
Your machine is equipped with systems that continually self-check during washing
operations and then take the necessary precautions and warn you in case of any
breakdown.
(*) See the chapter regarding maintenance and cleaning of your machine.
TROUBLE
CODE
POSSIBLE
FAULT
WHAT TO DO
E01
The door of
your machine
is left open.
Close the machine door. If
your machine persists to
indicate fault, turn off your
machine, unplug it and
contact the nearest authorised
service immediately.
E03
Pump is faulty
or pump filter
is clogged or
electrical
connection of
the pump is
faulty.
Clean the pump filter.
If the problem persists,
contact the nearest authorised
service. (*)
E04
Your machine
has an
excessive
amount of
water.
Your machine will discharge
water by itself. After the
discharging operation, turn off
your machine and unplug it.
Turn off your faucet and
contact the nearest authorised
service.
For Customer Services, Spare Parts & Manufacturer's Warranty Information please call 01204 664 084
-30-