Filter
Top Products
- Leave the door of your machine open to allow the inner part of your machine to dry
after removing your laundry.
- Switch the programme knob to Stop.
- Unplug your machine.
- Turn the water faucet off.
Warning Symbols
Water cut off / Low Mains Pressure
If the symbol flashes on the electronic display:
- The water supply may be closed.
- Mains water may be cut-off. If so, switch the programme knob to position 0. You
can select a programme and run your machine after the mains water is flowing again.
- Mains water pressure may be low.
- Water inlet hose may be twisted.
- Water inlet hose may be clogged. Clean water inlet hose filters. (*)
- Valve inlet filter may be clogged. Clean the valve inlet filters. (*)
(*) See the chapter regarding maintenance and cleaning of your machine.
Blocked pump filter
If the symbol flashes on the electronic display:
- Pump filter may be clogged.
- Discharging hose may be clogged or twisted.
For Customer Services, Spare Parts & Manufacturer's Warranty Information please call 01204 664 084
-24-