Russell Hobbs RH1250RTG Washer User Manual


 
Body
Clean the outer body of your machine with warm water and a non-inflammable
cleaning agent that will not abrade the body of your machine. After rinsing with some
water, dry using a soft and dry cloth.
Drum
Do not leave metallic objects such as needles, paper clips, coins, etc. in your
machine. These objects will lead to formation of rust stains in the drum. To clean
such rust stains, use a non-chlorine cleaning agent and follow the instructions of the
manufacturers of the cleaning agent. Never use wire wool or similar hard objects for
cleaning rust stains.
Trouble Shooting
All repairing operations required for your machine should be carried out by a qualified
engineer. Contact an engineer on 01204 664 084. If your machine requires a repair
or if you cannot remove the fault by the help of the information provided as follows:
Unplug your machine.
Turn the tap off.
Contact the nearest authorised service.
FAULT
POSSIBLE CAUSE
REMOVING METHODS
Your machine does not
discharge water.
Discharging hose clogged
or twisted.
Check the discharging
hose.
Pump filter clogged.
Clean the pump filter.
Laundry settled in the
machine unevenly.
Spread your laundry in the
machine evenly.
Your machine vibrates.
The feet of your machine
have not been adjusted.
Adjust the feet on your
machine.
Safety assembly fitted for
transport not
disassembled.
Disassemble the safety
assembly of your machine.
(**)
Less amount of laundry in
the appliance.
This will not block
operation of your machine.
Your machine overloaded
with laundry or laundry
Do not put in laundry more
than the amount
For Customer Services, Spare Parts & Manufacturer's Warranty Information please call 01204 664 084
-28-