Filter
Top Products
11SV61228 Rev. A
W983 Stacker/W863 Dryer Operating Guide
Adjust Stacker Height and Distance
Depending on the mailpiece, you will have to adjust the height and
dis tance of the Stacker in relation to the output of the printer.
CAUTION: The Stacker deck may rapidly
drop to its lowest height when you loosen the
Stacker height ad just ment knob.
To adjust the height:
1 Hold the Stacker steady with upright pressure and loosen the
adjustment knob.
Stacker Job Setup
You will be required to check and make the following adjustments
when you change from one job to another job.
Speed Control
The speed adjustment allows the proper amount of spacing between
mailpieces. This value varies greatly depending on mailpiece size.
2 Set the height to the rec om mend ed value (referenced from the
top of the printer output roller) and tighten the knob. Refer to
tables and graphs on pages 15-19 to determine the value.
DA Series Printer W983 Stacker with
W863 Dryer
Adjustment
Knob
Stacker_Dryer Op Guide Book.indb 11Stacker_Dryer Op Guide Book.indb 11 3/30/2004 10:26:45 AM3/30/2004 10:26:45 AM