Filter
Top Products
17
Consumer SupportTroubleshooting TipsOperating InstructionsSafety Instructions Installation Instructions
Before you call for service… www.GEAppliances.com
Troubleshooting Tips
Save time and money! Review the charts on the following
pages first and you may not need to call for service.
FF
When the cycle has started but water has not filled the wash basket
within 60 minutes, a signal will sound and this code will be displayed.
■ Make sure the incoming water faucets are on.
■ Make sure the fill hoses are not clogged or kinked.
Po
Power did not automatically turn off at the end of the cycle.
■ Press POWER ON/OFF to turn off the washer.
dr
Water is not draining out of the washer.
■ Make sure the drain hose is not kinked and is connected properly.
Ub
Wash load is unbalanced.
■ Distribute laundry evenly in the basket.
■ Make sure washer is level. See Leveling the Washer.
Lo
Washer lid is not closed.
■ Close lid.
Status Indicators
2h
Any time the total time required is more than 99 minutes,
this status indicator will be displayed.
IE
■ Press POWER ON/OFF to turn off the washer.
■ Call for service.