Filter
Top Products
3
Do not place any burning object including
burning candles or cigarettes, on top or
near the washing machine.
There is a danger of fi re or set
deformation.
Never disconnect the power plug by
pulling the power cord. Hold the power
plug as you pull it out.
There is a danger of an electric
shock or short circuit which
may cause a fi re.
WARNING
Never disassemble, repair or remodel this
washing machine.
If you disassemble, repair or
remodel the washing machine
by yourself, it can cause fi re or
irregular action that results in
injury.
Consult your dealer for repair.
Do not place the washing machine on
a damp place such as in a bathroom or
exposed to the outside weather.
There is risk of the insulation
deteriorating, electric
shock and overheating, or
breakdowns due to rust.
When you are cleaning your washing
machine, do not apply water directly to
any part of the washing machine.
It will cause short circuit and
electric shock.
Do not use power plug socket or wiring
equipment more than their rated capacity.
When you use the socket or wiring more
than its rated capacity by connecting multiple
appliances, it can cause fi re due to overheating.
Safety & General Precautions
WARNING
May cause a serious injury or death.
CAUTION
May cause physical injury or damage other items.
To prevent the risk of danger or material loss or damage to the user of others, make
sure to follow the precautions described below.
Never touch the laundry with your hand
during spin until the tub has completely
stopped spinning.
If you touch the laundry, even if
the tub is rotating slowly, there is
a danger of injury if the laundry
becomes entangled with your hand.
Pay particular attention to protecting
children from such injury.
Please do not wash or spin laundry which
stained with gasoline, kerosene, benzine,
paint thinner or the likes of it.
There is a risk of
explosion or fi re burn.
Make sure to push the power plug
completely into the power supply outlet.
If the power plug is not completely
pushed into the outlet, this may
cause electric shock and fi re due
to overheating.
• Never use a damaged power
cord.
Make sure that the ground is attached to
the power supply outlet.
Otherwise, there is a danger of electric shock
at the time of machine trouble or electricity has
leaked.
• Be sure to ask your dealer about
grounding work.
NA-F62-70B1-ENABPS.indd 3NA-F62-70B1-ENABPS.indd 3 5/8/08 9:16:21 AM5/8/08 9:16:21 AM