Filter
Top Products
Time
Select either a 24 hour or 12 hour clock,
and then set the current time of day.
Clock format
^
Use the X or Y buttons to select the
way you want the time to be
displayed and confirm your choice
with the OK button.
Set the time of day
^
Set the hour with the X and Y
buttons and confirm your setting by
pressing the OK button. Then do the
same to set the minutes.
Temperature unit
You can chose for the temperature to
be displayed in °C/Celsius or °F/
Fahrenheit.
The machine is delivered with the °C
option selected.
Brightness / Contrast
There are ten different display
settings.
The machine is delivered with this
option set at: level 5
The display brightness/contrast will
change as soon as a different setting is
chosen.
Standby display
To save energy, the display goes out
and the indicator light for the Start/
Stop button starts flashing slowly.
The display will always go out,
–
if a programme is not selected within
10 minutes of the machine being
switched on.
–
10 minutes after the end of a
programme.
Pressing one of the buttons switches
the display back on again.
You can also choose whether you want
the display to go out 10 minutes after a
programme has started or to remain
visible throughout the programme.
On
Standby comes on: The display will go
out 10 minutes after a programme has
started.
Not in current prog.
(the machine is
delivered with this option selected)
Standby is switched off: The display will
remain visible during a programme.
Keypad tone
An audible tone sounds each time a
button is pressed.
The machine is delivered with this
option set at: Off
Settings menu
79