Filter
Top Products
With the help of the following notes, minor faults in the performance of this
machine, some of which may result from incorrect operation, can be put right
without contacting the Service Department.
,
Repair work to electrical appliances should only be carried out by a
suitably qualified person in strict accordance with current local and national
safety regulations. Repairs and other work by unqualified persons could be
dangerous. The manufacturer cannot be held liable for unauthorised work.
The programme does not start
Problem Possible cause Remedy
The display remains
dark and the
programme selector is
not lit up.
There is no power to
the machine.
Check whether
– the mains plug is plugged
in and switched on.
– the fuse or circuit breaker
has tripped.
You are asked to enter
a code.
Access via a code has
been activated. See
the Settings menu.
Enter the code and confirm
the entry. Deactivate the code
if you do not wish this
message to appear in the
display the next time the
machine is switched on.
The programme does
not start when Drain/
Spin has been
selected.
The machine has not
been prepared for
using for the first time.
Prepare the machine as
described in "Before using for
the first time".
The display is dark. The display has
switched off
automatically to save
energy (Standby
mode).
Press a button. The machine
comes out of standby mode.
Problem solving guide
56